SoC prototyping

Scaleo chip has a powerful family of SoC prototyping platforms enabling real-time, cycle accurate and multi-proccessing SoC emulation.

These SoC prototyping platforms are part of the FCM® « Fast Configurable Microchip » Scaleo chip technology. FCM® product family combines scalabilities, cycle accuracy, efficient debug solutions and user-friendly configuration to guarantee rapid iterations. These combinations allow an early software accurate development, an early applicative board development and then reduce dramatically risks and time-to-market and global.

Scaleo chip has 3 main SoC prototyping products:
  • FCM®3 Station: supports complex multi-core SoC architecture + No FPGA Gate limitations
  • FCM® Modules: support up 2 core SoC architecture
  • FCM®A Target: FCM® Applicative Target board

FCM Station

FCM® 3 Station features:

  • SMP architecture support
  • No FPGA gate limitation
  • 4 x AMBA busses up to 60MHz
  • Versatile SMP bus architecture
  • High speed Multi-core connectors
  • Cross triggering support between cores
  • FCM SoC configurator GUI :
    • S/W MMI to configure the FCM3 through a PC
  • Debug
  • Bus statistic
  • Simulation model

FCM Module

FCM3Core chip:

  • ARM7TDMI @80MHz
  • ARM926 @220MHz
  • DMA
  • Memory controller
  • Internal busses @ 110MHz

FCM3 Module :

  • FCM3 core chip
    • ARM7 @ 80 MHz
    • ARM926 @220 MHz
  • StratixII I EP2S180/130/90/60
  • AHB busses up to 60MHz
  • DDR1 / SDRAM
  • SSRAM
  • Nand-Nor Flash
  • Applicative board target connector for FCM-A Target
  • Multi-core connector
  • FCM SoC configurator GUI:
    • S/W MMI to control FCM3 through a PC
  • Debug
  • Bus statistic
  • Simulation model

FCMA Target

FCMA-026 applicative board is a versatile platform supporting consumer and automotive Telematic applications.

FCMA-026 Applicative Target Board :

  • FCM3 compatible
  • FCM4 compatible
  • Hard Disk Drive
  • 3 x USB OTG PHY
  • Mini-AB connector
  • 1 x USB-A connector
  • 1 x Ethernet 10/100 PHY + connector
  • Video DAC + VGA connector
  • Audio stereo DAC + SPDIF connector + audio jack
  • Audio stereo ADC + audio jack
  • 1 x SDIO/SD/MMC connector
  • 1 x CAN High speed transceiver + connector
  • 1 x CAN Low speed transceiver+ connector
  • 4 x RS232 transceiver + connectors
  • 2 x PS2 transceiver + connectors
  • 1 x remote sensor
  • 120 I/O spare connector